All Exhausts Made in

United Kingdom

Triumph Rocket 3 2300cc Shorty Slash Twin and Single Trim Exhaust (patent pending)

THIS SYSTEM FITS THE ROCKET STANDARD AND ROCKET CLASSIC ONLY.

ULTIMATE SOUND 3 INTO 2 EXHAUST SYSTEM

DEEP THROATED GROWL, JUST HOW A BEAST LIKE THE ROCKET SHOULD SOUND!

1. Hand made by a professional exhaust manufacturer.
2. The 2.3 engine sounds awesome with this 3 into 2 deep tone exhaust.
3. Trims are interchangeable and can fit in any position, no blast or heat on passenger feet!
4. No fuel re-mapping needed, the Lambda sensor and ECU recognise the change and adjusts to suit.
5. 304 grade polished stainless steel throughout (No cheap metal and No rusting)
6. Sleeker looking bike and massive profile change, showing the big tyre off.
7. Increase in performance with improved exhaust flow.
8. Fully tested on a dyno. (Fuelling/Torque RESULTS/12 BHP INCREASE)
9. Unique design with central baffle system (non-removable). Extra baffles can be fitted if required.
10. Easy to install with full fitting instructions and tool list.
11. Comes complete with all fitting items, seal, grommet, fasteners clamps and heat shield nothing else needed.
12. Exhaust designed, developed and sold by qualified engineer and Rocket 3 owner.

PASSES MOT NO PROBLEM.

THIS SYSTEM DOES NOT FIT THE ROADSTER OR TOURING MODELS, PLEASE TAKE A LOOK AT THE REPLACEMENT SILENCERS OR THE OUTLAW SYSTEM

LIFETIME GUARANTEE!

BUY WITH CONFIDENCE

100% perfect FEEDBACK

Available with either double slash cut trims, or single slash cut trims, please specify your preference when ordering

£1085.00 plus delivery - Click here for currency converter

To place an order complete the "Contact" form, detailing your exact requirements, details of your bike, where you are in the world and we will respond within 24 hours. Thank you

Triumph Rocket 3 Custom Twin Silencers and Cat Replacement

TRIUMPH ROCKET 3 STANDARD AND CLASSIC TWIN PIPES ( and short) AND CAT REPLACEMENT PIPE CUSTOM SILENCERS (Patent Pending)

(PLEASE NOTE: THESE ARE NOT FOR THE ROCKET III TOURING OR ROADSTER)

FANTASTIC TWIN PIPE, DEEP TONE GROWL! HOW A ROCKET SHOULD SOUND

TOTALLY CHANGES THE PROFILE OF THE BIKE AND LOOKS and SOUNDS FANTASTIC

1. Awesome deep tone sound with NO cat restriction
2. Beautifully made by a professional exhaust manufacturer.
3. Loud but not offensive that drones you on a long run and no problem at MOT time.
4. Slash cut cone ends with a rolled edge showing a TOP quality finish.
5. No fuel re-mapping needed, the Lambda sensor and ECU recognises the change and adjusts the mixture to suit.
6. All items made from 304 grade stainless steel (no cheap metal and no rusting)
7. All items professionally polished to a chrome like finish.
8. Increase in performance (approx 12 BHP) with improved exhaust flow. 
9. PARTS INCLUDED:

• Left hand exhaust silencer, heat shield, exhaust gasket and clamp.
• Right hand exhaust silencer, heat shield, exhaust gasket, clamp, new support bracket (only RHS) and downpipe  joint heat shield.
• Cat replacement pipe, support bracket and grommet, gasket and clamp.
• All nuts and bolts.
• Exhaust designed, developed and sold by qualified engineer and Rocket 3 owner.

LIFETIME GUARANTEE

BUY WITH CONFIDENCE

100% perfect FEEDBACK

£1085.00 plus delivery

Short version £1065.00 plus delivery - Click here for currency converter

To place an order complete the "Contact" form, detailing your exact requirements, details of your bike, where you are in the world and we will respond within 24 hours. Thank you

Triumph Rocket 3 Performance Cat Bypass Pipe

CAT BYPASS PIPE (Patent Pending)

(PLEASE NOTE: THIS ITEM IS NOT FOR THE ROCKET III TOURER OR ROADSTER)

RELEASE THE FULL SOUND AND POWER WITH THIS CAT REPLACEMENT SYSTEM.

1. Perfect workmanship from a long established professional exhaust manufacturer 100% guaranteed quality for 5 years.
2. Gives the bike a louder deep tone growl and sounds awesome with standard pipes and TORs.
3. This pipe assembly incorporating the balance box ensures an even back pressure and has a single support bracket to ensure the system has rigidity when fitted. 
4. Significant Performance increase especially midrange and will improve between 10 to 15 BHP (tested) Riders who have had this modification love it and say they can really feel the power increase. 
5. Improved throttle response and acceleration.
6. The bike does not need re mapping (fuel adjustment) Lambda sensor (in the downpipe) and ECU re maps to suit the increased exhaust flow
7. This system is made from top quality 304 grade stainless steel and professionally polished to a chrome like finish.
8. Easy to fit, it’s a 30 minute job, fitting instructions provided.
9. Item developed by qualified engineer and Rocket 3 owner.
10. It’s a small inexpensive modification which gives big results

LIFETIME GUARANTEE

BUY WITH CONFIDENCE

100% perfect FEEDBACK

£358.00 plus delivery - Click here for currency converter

To place an order complete the "Contact" form, detailing your exact requirements, details of your bike, where you are in the world and we will respond within 24 hours. Thank you

TRIUMPH ROCKET 3 2300cc SHOTGUN EXHAUST

Matt Black Finish

TRIUMPH ROCKET 3 SHOTGUN SYSTEM

THIS SYSTEM FITS THE ROCKET STANDARD AND ROCKET CLASSIC ONLY

DOES NOT FIT the ROADSTER OR TOURING MODELS - email for further details

NOTHING LIKE THIS HAS BEEN HEARD BEFORE. A LOUD DEEP GROWL! (but not offensive on a long run or to neighbours)

THE EXHAUST GAS COMES OUT THE SIDE THAN OUT THE BACK AND SOUNDS AWESOME.

1. Unique design with a DOUBLE OUTLET and sounds fantastic.
2. Perfect workmanship from a long established professional exhaust manufacturer.
3. The 2.3 engine sounds awesome with this double shot gun outlet each side.
4. The centre resonator box is designed for back pressure and ensures a smooth power delivery.
5. No fuel re-mapping needed, the Lambda sensor and ECU recognise the change and adjusts to suit.
6. This system is made from top quality 304 grade stainless throughout  (No cheap metal and No rusting)
7. The shotgun pipes are high heat resistant Matte Black (and polished), the rest of the system is polished.
8. Increase in performance with improved exhaust flow.
9. Fully tested on a dyno. (Fuelling/Torque RESULTS/12 BHP INCREASE)
10. Easy to install with full fitting instructions and tool list.
11. Comes complete with all fitting items, seal, grommet, fasteners, clamps and heat shields (x 3) nothing else needed to fit and ride.
12. Exhaust designed, developed and sold by qualified engineer and Rocket 3 owner.

LIFETIME GUARANTEE

BUY WITH CONFIDENCE

100% perfect FEEDBACK

£1085.00 plus delivery - Click here for currency converter

To place an order complete the "Contact" form, detailing your exact requirements, details of your bike, where you are in the world and we will respond within 24 hours. Thank you

TRIUMPH ROCKET 3 3 into 1 EXHAUST

TRIUMPH ROCKET 3 3 into 1 EXHAUST SYSTEM AND CAT REPLACMENT (Patent Pending)

THIS SYSTEM FITS THE ROCKET STANDARD AND ROCKET CLASSIC ONLY

IT DOES NOT FIT the ROADSTER OR TOURING MODELS - email for further details

FANTASTIC DEEP TONE GROWL! UNIQUE ON A 3 INTO 1 with no CAT RESTRICTION

We can make the short 10 inch silencer or the 16 inch which is not as loud

1. Beautifully made by a professional exhaust manufacturer.
2. Loud but not offensive that drones you on a long run and no problem at MOT time. 
3. Slash cut cone ends with a rolled edge showing a TOP quality finish.
4. No fuel re-mapping needed, the Lambda sensor and ECU recognises the change and adjusts the mixture to suit.
5. All items made from 304 grade stainless steel (no cheap metal and No rusting)
6. All items professionally polished to a chrome like finish.
7. Increase in performance (approx 12 BHP) with improved exhaust flow.
8. We also do a short version of these, contact me for details.
9. Easy to install with full fitting instructions.
10. Comes complete with all fitting items, seals, fasteners and clamps, nothing else needed.
11. Exhaust designed, developed and sold by qualified engineer and Rocket 3 owner.
12. PARTS INCLUDED:

• Right hand exhaust silencer, heat shield, exhaust gasket, clamp, new support bracket and down pipe joint heat shield.
• Cat replacement pipe, support bracket grommet and clamp.

TOTALLY CHANGES THE PROFILE OF THE BIKE AND LOOKS and SOUNDS FANTASTIC!

LIFETIME GUARANTEE

BUY WITH CONFIDENCE

FREE FITTING AVAILABLE IN NOTTINGHAM, 'Ride in Ride out' contact me direct for details.

100% perfect FEEDBACK

10 inch silencer £842.00 plus delivery

16 inch silencer £875.00 plus delivery - Click here for currency converter

To place an order complete the "Contact" form, detailing your exact requirements, details of your bike, where you are in the world and we will respond within 24 hours. Thank you